Polar Q LOG Serie Instrucciones De Uso Para El Usuario página 27

Q LOG series chargers are equipped with internal data backup for each
charge that is made.
To download the data, you need to use a USB flash drive and insert it into
the appropriate connector on the front panel of the charger, see pages 3-4.
Turn on the charger with the battery
not connected and wait until you'll see
"No battery".
Unscrew the USB connector cover located
on the front panel of the charger.
e
Insert the USB flash drive into the connector.
e
After the standby screen,
the save data confirmation screen appears.
e
Press to start of download,
e
otherwise press
e
After pressing
When saving is complete, the display shows
the initial standby screen - "No battery".
The data is saved on the USB flash drive in a file called DATALOG.csv.
The DATALOG.csv file can be open with the Polar Charger Analyzer software.
The Polar Charge Analyzer software is included in the USB flash drive
supplied with the charger or can be downloaded from our website
www.polar-electronics.com in download area.
To use the Polar Charge Analyzer software, consult the manual included
with the program.
SAVING LOG DATA
to cancel.
data downloading starts.
10.24.42
No
Battery
27.