Fulcrum RACING ZERO DB Manual Del Usuario página 36

7 - MAINTENANCE
Note
We recommend that you contact a specialized mechanic for all the assembly, disassembly and all hub, rim and spoke replacement operations. Choose with him the most suitable interval of
inspections for you on the basis of the conditions of use and intensity of your activities (e.g. racing, rain, salted roads, muddy roads, cyclist's weight, etc.).
TYPE OF OPERATION
Check at a specialized mechanic's:
check the lubrication, rolling and clearance of the hubs / check the wheel centering
•
Check at a specialized mechanic's:
• check the lubrication, rolling and clearance of the hubs and replace any worn parts of the hubs and free wheel body
• check the wheel centering
• If the hub bearings are CULT (in Cronitect
lubricated with specific oil for bearings.
• If the hub bearings are USB or Standard, periodically take the bicycle to a specialised mechanic to have the hub bearings and the balls lubricated with specific grease for bearings.
• When riding in wet conditions, remember that the stopping power of your brakes is greatly reduced and the adherence of the tires to the ground is considerably reduced. This makes it harder
to control and stop your bicycle. Extra care is required when riding your bicycle in wet conditions to avoid an accident. An accident could result in severe personal injury or death.
• Never make any modifications whatsoever to any component of any Fulcrum product.
• Parts which have been bent or otherwise damaged in an accident or as a result of any other impact must not be re-straightened. They must be replaced immediately with original Fulcrum parts.
• After using the wheel for the first time, check wheel trueness and circularity.
WARNING!
Using wheels that have not been centred properly or which have broken or damaged spokes may result in accidents, personal injury or death.
• Do not expose the carbon wheels to high temperatures. Do not store bike parts in vehicles parked in the sun, and do not store near radiators or other heat sources. Do not store carbon fiber
products in direct sunlight.
, advanced solution by FAG and the balls in ceramic), periodically take the bicycle to a specialised mechanic to have the hub bearings and the balls
®
®
KMS (MAX)
2.000
10.000
17