Fiap profibrand NovaVac 300 Instrucciones De Uso página 11

GB
VACUUM ACCUMULATOR
Seal the freshness bag separately.
- Connect the plug to the mains.
- Lay the opening of the vacuum bag flat on the rubber strip of the sealing bar and
then close the lid.
- Using both hands, press down on the top cover until you hear a „click" Hear a sound
indicating the top cover is attached.
- Press the sealing button, the LED indicator lights up and when the LED indicator is
off, it means the sealing is complete.
- Press the unlock buttons on the left and right side of the device, open the device lid
and take out the vacuum bag.
VACUUM STORAGE IN SNAP BAGS
- Connect the plug to the mains.
- Put the items you want to keep fresh in the fresh storage bag.
- It is important to ensure that the opening of the fresh storage bag is clean and free
of wrinkles or dust.
- Make sure the opening of the plastic bag is in the vacuum pump cavity below the
pump hole and above the air seal.
- Using both hands, press down on the top cover until you hear a „click" Hear a sound
indicating the top cover is attached.
- Press the vacuum seal button again. The indicator lamp lights up and the device
vacuums and seals automatically. - After the indicator light has gone out, the
vacuum bag is sealed.
- When finished, hold the release buttons on both sides of the machine pressed, open
the top cover and take the sealed parts out of here. The whole process is over.
FISH MARKETING
1 1