cecotec BAMBA PRECISIONCARE SAMURAI Manual De Instrucciones página 76

ENGLISH
comb with the maximum trimming length setting (4 mm) to
avoid accidentally trimming hairs that are too short. As you
become familiar with the guide combs, change them by 3 mm,
2 mm and 1 mm until you reach the desired cutting length.
1. Switch on the appliance.
2. For the most effective trimming, move the appliance against
the direction of hair growth. Make sure that the surface of the
guide comb always remains in contact with the skin.
WARNING: as not all hairs grow in the same direction, you may
need to use different trimming positions (upwards, downwards or
crosswise).
76
BAMBA PRECISIONCARE SAMURAI
3. If cut hairs have accumulated on the guide comb, switch off
the appliance, remove the guide comb and clean the hair
from the comb. Once clean, put the guide comb back on and
continue cutting.
Trimming the beard
4. Make sure the guide comb is put back into the appliance and
use the 1mm or 2mm setting for a "stubble" look.
5. When you have finished using the appliance, switch it off by
pressing the on/off button. Then remove the guide comb (Fig.
5) and clean the hairs accumulated in the appliance with the
help of the cleaning brush.