Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS, TOOLS, MATERIALS
THE FOLLOWING
PARTS ARE SUPPLIED
WITH THE OVEN:
NOTE: Depending on your ventilation requirements, you may not use all of these parts.
Damper/duct connector
(for roof vented or wall vented installation)
Not Actual Size
One power cord clamp and
One dark-colored
mounting screw
(to hold the power cord)
Actual Size
One power cord clamp bushing - Actual Size (for the cord hole in a metal upper cabinet)
Four 114" x 2" lag screws - Actual Size
(for wall stud holes)
Four 114" x 3" toggle bolts - Actual Size
(for drywall holes)
I11
Z
I=
m
01
Two 1/4" x 3" bolts - Actual Size
(for securing to the upper cabinet)
Two tapping screws - Actual Size
(for attaching the damper duct connector)
Four spring toggle heads - Actual Size
(for the toggle bolts)
One upper cabinet template - Not Actual
Size
NOTE: You need to install at least one lag screw into a 2" x 4" stud and four anchor bolts into the wall,
and the mounting area must meet the 150 Ibs. weight requirement.
5
Publicidad
