Operation
EN
Childproof lock
The childproof lock serves the purpose of preventing children from switching on the induction hob either
accidentally or intentionally. The controls are blocked here.
Switching on the childproof lock
1. Press the ON/OFF key of the hob (1 s.) until the power setting 0
appears.
2. Immediately afterwards press a cooking zone power setting display
and keep it pressed (for approx. 3 seconds) until the sensor field lights
up from 0-P.
3. Immediately afterwards slide over the complete sensor field from 0-P
to activate the childproof lock. The power setting indicators will show an
L for child lock, the controls will be disabled and the hob will switch off.
Switching off the childproof lock
4. Press the ON/OFF key.
5. Immediately afterwards press the power setting display and keep it
pressed (for approx. 3 seconds) until the sensor field lights up from 0-P.
6. Immediately afterwards slide over the complete sensor field from P-0
to deactivate the childproof lock. The L will go off.
Notes:
In the event of a power cut the childproof lock will not be cancelled.
Bridging function
The front and the rear cooking zones may be activated together for a cooking process (bridging function).
This enables larger cookware to be used.
1. Switch on the hob and position a pot on the cooking zones that
have to be bridged.
2. Press the two cooking zone selection keys of the front and back
cooking zones simultaneously to activate the bridging function. The
bridging function has been switched on and the back power level
setting shows the bridge Operation is carried out with the front and
back cooking power level setting and the sensor field.
3. Activate the front and back cooking zones simultaneously again or
switch the hob off to deactivate the bridging function. The cooking
zones are split into 2 separate zones again.
Notes:
The roaster or the pot will need to cover at least half of the cooking
zones used in order to be recognised by the pan recognition device!
49