Air Conditioner Features - WWK05CR to WWK12CR
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control alone or with the remote controller.
ADJUSTS
TEMPERATURE
OR TIME
SETS FAN
SPEED
ENERGY
SAVER MODE
CHECK FILTER
RESET
BUTTON
UNIT CONTROL
TO TURN UNIT ON OR OFF:
DISPLAYS
TEMPERATURE
ON | Off
Press
OR TIME OR
unit on or off.
ERROR CODES
NOTE
ADJUSTS
TEMPERATURE
The unit will automatically
OR TIME
initiate the Energy Saver
function under Cool, Dry, Auto
(only Auto-Cooling and Auto-
Fan) modes.
TO CHANGE TEMPERATURE
SETS MODE
SETTING:
SLEEP MODE
Press UP (
to change temperature setting.
ACTIVATES
NOTE
TIMER
Press or hold either UP (
TURNS UNIT
DOWN (
ON OR OFF
desired temperature is seen on
the display.
This temperature will be
automatically maintained
anywhere between 62°F (17°C)
and 86°F (30°C). If you want
to display the actual room
temperature, see To Operate on
Fan Only section.
TO ADJUST FAN SPEEDS:
Press
in four steps-Auto, Low, Med or High.
Each time the button is pressed,
the fan speed mode is changed. On
Dry mode, the fan operates on Low
speed automatically.
ON/OFF button to turn
)/DOWN (
) button until the
to select the Fan Speed
Fan
) button
)/
Page 11