Kenmore 106 Manual De Uso Y Cuidado página 18

The door rails may be removed for easier cleaning.
Snap-on Door Rails
To remove the rails:
1. Remove all items from the shelf.
2. Push in slightly on the front of the bracket while pulling
out on the inside tab.
3. Repeat these steps for the other end of the rail.
To replace the rails:
1. Line up the ends of the brackets with the buttons on
the sides of the door liner.
2. Firmly snap bracket and rail assembly onto the tabs
above the shelf as shown.
Drop-in Door Rails
To remove the rails:
1. Remove all items from the shelf.
2. Pull straight up on each end of the rail.
....... f_
To replace the rails:
1. Slide the shelf rail into the slots on the door.
2. Push the rail straight down until it stops.
.:@el
To remove the shelf:
1. Lift the shelf off of the supports.
2. Slide it out of the shelf support holes.
Replace shelf in the reverse order.
The freezer basket can be used to store bags of frozen
fruits and vegetables that may slide off freezer shelves.
To remove the freezer basket:
1. Slide it out to the stop.
2. Lift the front and slide it out the rest of the way.
To replace the basket:
1. Position it on the slides, making sure that the wire
stops are clear of the front of the slides.
2. Slide it back in all the way.
18