IKEA VALLHORN Guia De Inicio Rapido página 3

English
VALLHORN motion sensor works with smart lights and plugs from IKEA. It can be
used with DIRIGERA hub to control smart products via the IKEA Home smart app.
IKEA Home smart app
For Apple devices, download the app using the App Store. For Android
devices, download the app using Google Play store.
Note: If you have a TRÅDFRI gateway please use IKEA Home smart 1 app. For the
best experience, please upgrade to DIRIGERA hub.
Getting started with DIRIGERA hub
Download the IKEA Home smart app and follow the instructions on screen. With
DIRIGERA, you can connect as many products as you want to one motion sensor.
Getting started without DIRIGERA hub
1. Make sure the smart product you want to connect is installed and powered on.
2. Hold the motion sensor close to the smart product (less than 5 cm away).
3. Press and hold the Pairing button
steadily shine under the lens of the motion sensor. The smart product will pulse
with a white LED once connected.
Good to know
Without DIRIGERA, you can connect a maximum of 10 smart products to one
motion sensor. Remember to add one product at a time. If your products are
close together, disconnect the ones you have already connected while adding the
next product.
for at least 10 seconds. A red LED will
3