Publicidad
Idiomas disponibles
Idiomas disponibles
Basic operation
° Input
Block _ You can brock the input source with this function. For example, if you want to block AV
input, just highlight [AV] and press [ENTER]. The AV input will not be seen in the screen.
o Change Password o The first time you use this function, use the default password. Tf you want to
change it, first enter the new password then enter the same password again.
o CUeanAll - This function will let you clean all the channels stored on this TV.
Note: If you choose this function, all the programs you preset will be lost.
TV settings
1. Press MENU to open the OSD option
2, Press A or T to highlight TV, then press _ to enter the TV menu.
.
Press A or V to highlight an option, then press 4 or _, to adjust the option. You can
adjust:
o Tuner Mode - Select the TV signal source. You can select Antenna or CabUe.
o ChannemScab o Scans for channels that have signals and stores the channels information in memory.
When you press @or _, your TV skips any channels that do not have a signal.
° Channel Skip - Deletes a channel stored in memory. When you press CN+ or CH-, your TV skips the
channel you deleted. You can still tune to the channel using the number buttons on the remote control.
o MT$ o Selects the sound mode. You can select Nlono, Stereo, or SAP (second audio program).
• Audio Language-Selects the audio language for a program.
Cleaning
and care
WARNING:
Do not try to remove the cabinet from the back, Refer servicing to qualified service technicians,
To clean
the
TV screen:
1, Unplug the TV to avoid possible shock hazard.
2. Use a clean celhlose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause
damage to the TV.
3. Wipe off any excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
19
Publicidad
