Publicidad
Idiomas disponibles
Idiomas disponibles
S
T
1. Assembling spray gun holder
Press the spray gun holder (3) on to the machine. (See Fig A)
2. MOUNTING OF INLET WATER FILTER
1 ) Remove the protection cap (a) of inlet firstly. (See Fig B)
3. MOUNTING OF HANDLE
D,E)
4. ASSEMBLING THE HIGH PRESSURE HOSE
2 ) Tighten the high pressure hose into spray gun (4). But do not
overtighten.(See Fig G)
3 ) Insert the spray lance (16) into the spray gun (4), rotate it 1/4
turn and maker sure it is locked. Attach the nozzle to the spray
lance. (See Figure H)
outlet.(See Figure l, J)
5. ASSEMBLING TURBO NOZZLE
lnstall the turbo nozzle (15) on the spray lance (16).(See Figure K)
12
Assembly
U
6. ASSEMBLING FIX BRUSH
1 ) Remove the spray lance (16) from the spray gun (4), hold the
spray lance and rotate it 1/4 turn , then pull it back to remove the
spray lance.(See Figure L)
2 ) lnsert the fix brush (11) into the spray gun (4) and rotate it 1/4
turn until itis locked.(See Figure M)
3 ) Then you can use it.
7. CONNECTING WATER SUPPLY
connect one end of a home inlet hose (not supplied) to the quick
Operation
1. ON/OFF SAFETY SWITCH
1) Connect the plug into a properly outlet.
starting. Depress safety lock (c) to "unlocking" position, then trigger
damage to high pressure seals and reduce the service life of
pump.(See Figure P, Q)
2. SURFACE PREPARATION
Before staring any cleaning task it is important the area for objects
13
Publicidad
