Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING OF WATER INLET FILTER
frequently according to use.
Check that it is intact before re-mounting it.
damage the pump valves.
CAUTION: Please fit the filter
Cleaning of nozzle
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle.
IMPORTANT:
detached! (See Figure U)
Cleaning of machine vents
The machine should be kept clean so as to let cooling air pass
freely through the machine vents.
Greasing of couplings
To ensure an easy connection and that o-rings do not dry up.
The couplings should be greased regularly.
16
Troubleshooting
repair.To avoid unnecessary disappointments, you should check the
Symptom
Cause
Machine
Machine not
refuses to sta
plugged in
Defective socket
Defective extension
cable
Fluctuating
Pump sucking air
pressure
out or stuck
out
Machine stops
Incorrect mains
voltage
Thermal cut-out
activated
Nozzle partially
blocked
Recommended action
Plug in machine
Try another socket.
cable.
Check that hoses and
connections are airtight.
Clean and replace or refer
to local distributor
Clean and replace or refer
to local distributor
Check that the mains
voltage corresponds to
specification on the model
tag.
Clean the nozzle
17
Publicidad
