Publicidad
Idiomas disponibles
Idiomas disponibles
Speedaire Operating Instructions and Parts Manual
®
Speedaire
SPUR GEAR REDUCERS INSTRUCTIONS
General Information:
When ordering parts or requests for information, the
product nameplate has all information required. It also
has the type of lubricant required for unit.
Product Use Criteria:
Speedaire Air Gear Motors are
not self-locking. If the application requires a brake for
Spur Gear Reducer Specifications
Model
Speed Range(Reducer
Output Shaft)
Gear Reduction
Maximum Allowable
End Thrust With Zero
Overhung Load.
(Reducer Output
Shaft)
Maximum Allowable
Overhung Load With
Zero End Thrust.
(Reducer Output
Shaft)
Use SAE #10 Air Tool Oil to lubricate it.
Remove the plugs and add oil to the filling hole until the oil scale hole
Lubrication
overflows for horizontal operation. Refer to fig. 5.
Oil Scale Hole
Rotary Vane Air Gear Motor
22UX54
30 to 300 RPM
10︰1
200 lbs/90.8kg at 300 RPM
200 lbs/90.8kg at 300 RPM to 600
lbs/272.4kg at 30RPM
safety, please contact your Speedaire Representative. It
is always recommended to Check the oil level in the
gear box to make sure it is filled to the proper level.
Loss of performance, Damage, or Failure can happen if
the oil level is low.
22UX81
20 to 200RPM
15︰1
200lbs/113.5kg at 200RPM to
600lbs/272.4kg at 20RPM
200lbs/90.8kg at 200RPM to
600lbs/272.4kg at 20RPM
Filling Hole
7
22UX54, 22UX81
Fig. 5
E
N
G
L
I
S
H
Publicidad
