Model 2151
ASSEMBLY INSTRUCTIONS
Please read all instructions thoroughly before proceeding. Ensure
that all plastic packing material and any transit protection is removed
before assembling.
Find a large, clean area to assemble your unit. Please refer to the parts list and
assembly diagrams as necessary.
S T E P 0 1
With the help of another person, remove the griddle body
from the packaging and lay it upside down on a smooth, flat surface.
Unlatch and unfold the legs to their vertical position, then use two (2)
small thumb screws to attach the fixed wheels onto the ends of the right
leg assembly.
Use two (2) acorn nuts and two (2) spring washers to attach the two (2) caster
wheels onto the left leg assembly. (Ensure that the caster wheels are locked.)
S T E P 0 2
Place the bottom shelf
between the leg assemblies. Use one
(1) large thumb screw to secure the
shelf to the left leg assembly.
Use one (1) medium thumb screw
to attach the propane tank holder
and secure the shelf to the right leg
assembly.
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you
should handle all compo-
nents with care to avoid
accidental injury.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
Push to lock
Assembly Guide
| Owner's Manual
!
!
WA R N I N G
WA R N I N G
• Do not mix old and new
The manufacturer has made
every effort to eliminate any
batteries.
sharp edges. However, you
• Do not mix alkaline, stan-
should handle all compo-
dard (carbon-zinc) or
nents with care to avoid
rechargeable (ni-cad, ni-mh,
accidental injury.
etc.) batteries.
Some parts may contain
sharp edges, especially as
noted in these instructions.
Wear protective gloves if
necessary.
!
C A U T I O N
Two people are recom-
mended for the assembly of
!
WA R N I N G
this product.
• Do not mix old and new
batteries.
• Do not mix alkaline, stan-
dard (carbon-zinc) or
rechargeable (ni-cad, ni-mh,
etc.) batteries.
!
C A U T I O N
Two people are recom-
mended for the assembly of
this product.
blackstoneproducts.com/support
Th
ev
sh
sh
ne
ac
So
sh
no
W
ne
Th
du
co
he
sis
da
Th
du
co
he
sis
da
07