Armada Technologies Pro40 Manual Del Usuario página 15

Otherwise, the instrument may be damaged and may be
struck by electric shocks.
Continuity measurement
1) Turn the knob to
measurement function according to "FUNC." key.
2) Insert the red probe in "
in "COM" socket。
3) Contact the probe to the measured circuit or resistance,
4) If the resistance or circuit of the measured resistance is less
than 30Ω, the buzzer will on and the green indicator lights up
at the same time; when the resistance is about between 30Ω
to 60Ω, the red indicator lights up; the screen displays the
resistance of the measured circuit.
6) WARNING
When measuring Continuity on the line, disconnect the
power supply and discharge all the high-voltage capacitors.
Otherwise, the instrument may be damaged and may be
struck by electric shocks.
Diode measurement
1) Turn the knob to
function according to "FUNC." key.
shift and Switch to Continuity
" socket insert the black probe
shift and Switch to diode measurement
14