Warm House Oslo OWF-1/0303 Manual Del Usuario página 3

overheat. If necessary, have a qualified electrician check and / or replace the wall outlet.
24. Do not place the fireplace near a bed for objects such as pillows or blankets can fall off the bed and
be ignited by the fireplace.
25. Never clean this fireplace while it is plugged in. To disconnect, turn control to OFF, then remove the
plug from the outlet. Never pull the cord. Always hold the plug firmly and then remove from the
outlet.
26. This fireplace is intended for supplemental heat and / or decorative purposes. Continuous use for
several hours can impact the performance and life of the fireplace.
27. It is not intended to be used in commercial, industrial or agricultural settings.
28. Do not use outdoors.
29. Do not shorten or change the shape of the bracket.
Getting Started

Remove the fireplace from the box.

Remove the packaging. Place it inside the box or safely dispose elsewhere.
Package Contents

Electric Fireplace

Wall Mount Bracket

Screws and Screw Anchors

Pebble Pack

Remote Control (Requires 2 x AAA Batteries – Not Included)

Instruction Manual
Features

Dual heat settings (750Watts / 1500Watts)

Realistic color changing LED flames with 10 different colors to choose from

Auto color changing mode built‐in

Flames operate with & without heat with adjustable flame brightness

Black, heat resistant, tempered flat glass panel

Built‐in overheating protection, auto safety shut‐off
Quick Reference Guide

Prior to installation, please ensure that the voltage and capacity of your power outlet is
compatible with your fireplace.

Your fireplace may emit a slight, harmless odor during its first use. This odor is a normal reaction
caused by the initial heating of internal fireplace parts and it will not occur again.

It is normal for fireplace to make a rattling sound for a short duration of time during its first use.

If your fireplace does not emit heat, please ensure the fireplace switch is on. For further
information, please refer to the Troubleshooting section of this manual.

3