Sage the Perfect Press BSG600 Guía Rápida página 8

Care & Cleaning
Before cleaning, switch the On/Off switch to the Off
position and unplug the sandwich press. Allow your
sandwich press to cool before cleaning.
Always clean your sandwich press after each use
to prevent a buildup of baked-on foods.
Wipe cooking plates with a soft cloth. If cooked on
food is not removed by this method reheat the unit
for 1–2 minutes, then brush with a little oil or melted
butter.
NOTE
• The cooking plates are coated with a
non-stick surface; do not use abrasives.
• Do not use spray-on non-stick coatings as this
will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
1. Switch the On/Off switch to the Off position and
unplug the sandwich press.
2. Allow the sandwich press to fully cool.
3. Move the Adjustable Height Control clip on the
right hand side of the sandwich press to LOCK
position so that the top and bottom cooking
plates are locked together.
4. Wrap the power cord in the cord storage area
below the appliance.
5. The sandwich press is designed to be stored at
upright position for compact storage. Store on a
flat, dry, level surface.
WARNING
DO NOT IMMERSE ANY PART OF THE
SANDWICH PRESS IN WATER OR ANY OTHER
LIQUID.
Any other servicing should be performed by an
authorised service representative.
EN
7