PRIXTON X-TREME BF300 Manual página 18

CONTROL PANEL
SPECIFICATIONS
TIME 00:00-99:59MIN
SPEED(SPD) 0.0-99.9KM/H(ML/H)
DISTANCE(DST) 0.00-99.99KM(ML)
CALORIES(CAL) 0.00-999.9KCAL
ODOMETER(ODO) 0-9999KM(ML)
PULSE(PUL) 40-240BPM
KEY FUNCTIONS
MODE: This key lets you select and lock on the function you want. The monitor will be reset by
changing the battery or pressing the MODE key for 3-4 seconds
AUTO ON/OFF: The system turns on when any key is depressed or when it senses input from the
speed sensor.
MODE: To choose the SCAN or LOCK option if you do not want the SCAN mode, press the MODE
key when the indicator is on the function you want starts blinking.
TIME: Press the MODE key until the indicator locks on TIME. The total working time will be
shown when pedaling starts.
SPEED: Press the MODE button untill the indicator lands on SPEED, the current speed will
be shown.
DISTANCE: Press the MODE button untill the indicator lands on DISTANCE, the distance of your
workout will be displayed.
CALORIE: Press the MODE button untill the indicator lands on CALORIE, the calories burned
will be displayed.
ODOMETER: Press the MODE button untill the indicator lands on ODOMETER, the total accumu-
lated distance of your workout will be displayed.
PULSE: Press the MODE button untill the indicator lands on PULSE, the user's current heart rate
will be displayed in beats per minute. Place the palms of your hands on both contact pads located
on the handlebars and wait for 30 seconds for the most accurate reading.
SCAN: This automatically displays changes every 4 seconds.
NOTE: If there is an incorrect readout on the monitor, change or replace the batteries.
18