Thepurpose of safety symbols isto attract y our
attention to possible dangers. Thesafetysymbols,
andtheirexplanations, deserve yourcareful attention
andunderstanding. Thesafety warnings d o not by
themselves e liminate anydanger. Theinstructions o r
warnings t heygivearenotsubstitutes f orproper
accident p revention m easures.
SYMBOL
MEANING
SAFETY ALERT: Indicates
danger,
warning
or caution. Attention
is required in
order to avoid serious personal injury. May
be used in conjunction
with other symbols
or pictographs.
NOTE: Advises you of information or instructions
vital
to the operation or maintenance of the
equipment.
SYMBOL
MEANING
DANGER:
Failure to obey a
safety warning will
result in serious injury to yourself or to
others. Always follow the safety precautions
to reduce the risk of fire, electric shock and
personal injury.
WARNING:
Failure to obey a
safety warning
can
result in injury to yourself and others.
Always follow the safety precautions
to
reduce the risk of fire, electric shock and
personal
injury.
_
Failure
obey a
to
safety warning may
result in property damage or personal injury
to yourself or to others. Always follow the
safety precautions
to reduce the risk of fire,
electric shock and personal injury.
• IMPORTANT SAFETY INSTRUCTIONS
•
READ ALL INSTRUCTIONS
BEFORE
OPERATING
When using the unit,
WARNING:
you must followthe
safety rules. Please read these instructions
before operating the unit in order to ensure
the safety of the operator and any bystanders.
Please keep these instructions for later use.
• Read the instructions carefully. Be familiar with the
controls and proper use of the unit.
• Do not operate this unit when tired, ill or under the
influence of alcohol, drugs or medication.
• Children and teens under the age of 15 must not use
the unit, except for teens guided by an adult.
• Before each use, thoroughly inspect your unit for loose
or damaged parts. Do not use until adjustments
or
repairs are made.
• All guards and safety attachments
must be installed
properly before operating the unit.
• Use the right tool. Use this unit only as described in
this manual. Do not use for any job except that for
which it is intended. Use only the manufacturer's
recommended
attachments.
• Inspect the area before starting the Blower/Vacuum.
Remove all debris and hard or sharp objects such as
glass, wire, etc.
DANGER:
When using electric
gardening appliances,
basic safety precautions should always be
followed to reduce the risk of fire, electric shock
and personal injury. Carefully read and
understand the entire operator's manual before
using your unit. Pay close attention to the
operating instructions and safety warnings.
• Use the unit only in daylight or good artificial light.
• Keep all bystanders, especially children and pets, at
least 50 feet (15 m) away from the unit while operating.
ELECTRICAL
SAFETY
WARNINGS
• Since the tool is double-insulated,
a 2-wire extension
cord (an extension cord without a ground) may be
used. A 3-wire extension cord (an extension cord with
a ground) that uses a NEMA type connector
(parallel
blade, U ground)is
recommended.
Extension cords
are available from your local retailer. Use only round-
jacketed extension cords approved for outdoor use.
• This tool is double-insulated. Repair or replace damaged
cords.
ING:
To reduce the risk of
electrical shock, use
only SW-A, SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-W or SJTOW-A cord types.
• To reduce the risk of electrical shock, this unit has a
polarized plug (one blade is wider than the other). This
unit will fit with a polarized plug in one way only. If the
plug does not fit fully into the unit, reverse the plug. If
it st=lldoes not fit, use a cord with the correct
connection. Do not modify the unit in any way.
MINIMUM
WIRE SIZE FOR EXTENSION CORDS FOR
120 VOLT APPLIANCES
USING 0-12 AMPS*
Cord length (ft.)
25
50
100
150
Wire size (AWG)*
16
16
16
14
*The wire size (AWG) for appliances using 12 to 16
amps is 14 AWG for 25 feet, 12 AWG for 50 feet, and
not recommended
for 100 or 150 feet.