Technical Data
Type
Power supply
Nominal current
Nominal force
Ripple
Nominal stroke length *
Running speed: ventilation (SHEV high-speed function)*
O1, O2
O3
C3
C2, C1
Nominal locking force
Service life
Duty cycle
Housing
Ingress protection
Temp. range
Fire stability
Emission sound pressure level
Additional functions*
Opening and Closing Ranges
O1*
23 mm
300 N
C1*
C2*
23 mm
77 mm
150 N
150 N
* Programmable with software SCS
*** Not compatible with PS-VE1, PS-VE4, GVL 8304-K, as well as RZN-E and GVL-E without stabilisation
Closing edge protection
In the "CLOSE" direction the drive has an active
protection for the main closing edge. If there is an
overload in the closing ranges C3 and C2, the drive
runs "OPEN" for 10 seconds, then "CLOSE" again. If
closing is not possible after three attempts, the drive
remains in this position.
In addition, the drive is equipped with passive
protection. The closing speed in closing range C2
and C1 is reduced to 5 mm/s.
Significantly greater forces can be
exerted at the secondary closing
edges. Danger of crushing hands and
fingers!
99.829.14 1.0/07/23
KA-0300-XXXX-1-ACB
1,0 A
300 N**
7mm/s (12,2 mm/s, tensile load (1/2
nominal load) 16,1 mm/s)
7mm/s (12,2 mm/s, tensile load (1/2
nominal load) 16,1 mm/s)
7mm/s (12,2 mm/s, tensile load (1/2
nominal load) 16,1 mm/s)
5 mm/s (5 mm/s)
approx. 2600 N (without bracket)
>20.000 double strokes
30 % (With cycle time 10 minutes)
Aluminium powdercoated (~ RAL 9006)
IP 32
(With covering stoppers delivered with bracket sets)
Closing edge protection activated (3 stroke repeatings);
Locking relief activated
O2*
Nominal stroke -38 mm
300 N
Nominal stroke -100 mm
** + approx. 20 % switch-off reserve (temporary)
English
KA-0500-XXXX-1-ACB
24 V DC / ±15 %
≤ 2 V (stabilized)***
Siehe Typenschild
7mm/s (13,3 mm/s, tensile load (1/2
nominal load) 17,2 mm/s)
7mm/s (13,3 mm/s, tensile load (1/2
nominal load) 17,2 mm/s)
7mm/s (13,3 mm/s, tensile load (1/2
nominal load) 17,2 mm/s)
-15 ... +75 °C
30 min / 300 °C
LpA ≤ 70 dB(A)
C3*
250 N
1,4 A
500 N**
5 mm/s (5 mm/s)
, optionally IP 42
O3*
15 mm
300 N
Beside
closing edge
7/20
KA-1-ACB