Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Air Circulation Operation
Auto Clean Operation
During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy
dehumidification operation can be removed.
Display Luminosity（Optional）
The unit display luminosity can be adjusted by using the remote controller.
Open the cover of the remote controller and press the LED LUMINOSITY BUTTON.
Display LED will be off. Press the button again to set bright display.
Setting the Current Time
1
Time can be set only when you press the RESET BUTTON.
Having replacing the batteries, you should press the RESET BUTTON to reset the time.
Press the ON/OFF BUTTON.
2
Press 2
F button and check if icon is on.
nd
3
Press the TIME SETTING BUTTONS until the desired time is set.
4
Press the TIMER SET/CANCEL BUTTON.
NOTE
Check the indicator for a.m. and p.m.
14
Room Air Conditioner
This operation circulates the air without cooling or heating.
It can be activated by pressing the AIR CIRCULATION BUTTON.
Once the air circulation is activated you can select the fan speed by
pressing the INDOOR FAN SPEED SELECTION BUTTON.
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned off, the indoor fan is still running for
about 30 minutes internally without cooling or dehumidification
operation. This function dries up any remains of moisture & cleans
the unit internally. If you push the Auto Clean button again, this function is
cancelled.
NOTE
During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean
button is used. During this operation, 'Cooling Lamp' lights up.
AUTO CLEAN
).
AUTO CLEAN
CANCEL
SET
Publicidad
