Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Initial settings
Selecting digital output E
Select the digital output to be output from the optical/coaxial
digital audio output connector of the unit.
7 At the initial settings screen
Press A/V to select "7 Digital Audio Out¬
put" and press SELECT.
o
Digital Audio Output
@
(BO
|1 LPCM (DVD) Off
1
CB3
2 Dolby Digital Bitstream
on
m.
0 Exit
2
Press A/T to select the preferred item
(1 or 2) and press SELECT.
When "1 LPCM (DVD)" is selected
Off:
Only linear PCM of 48 kHz/16 bit is output from
the digital audio output connector. During play¬
back of the DVD recorded in the linear PCM of
48 kHz/20 bit/24 bit or 96 kHz, no digital audio is
output. (Factory preset)
PCM: During playback of the DVD recorded in the lin¬
ear PCM of 48 kHz/20 bit/24 bit or 96 kHz, digital
audio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright protection.)
When "2 Dolby Digital" is selected
Bitstream: Dolby Digital (AC-3) bitstream (2ch-5.1ch) is
output. (Factory preset)
PCM:
PCM (2ch) of 48 kHz/16 bit is output.
3
Press A/▼ to select the preferred value at
each screen and press SELECT.
The screen illustrated in step 1 is displayed. Press A/W to
select "0" and press SELECT to return to the initial settings
screen.
For your reference:
• Make settings as shown in the table B depending on the kind of
amplifier that is connected to the optical/coaxial digital audio output
connector.
•'Audio output from the unit's audio output connectors is converted to
48 kHz/16 bit in addition to audio from the digital audio output
connector.
To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz, con¬
nect the amplifier or decoder directly to the audio output connectors,
not to the digital audio output connector. [Select "Off' at the
"1 LPCM (DVD)".]
*2When connecting an amplifier (with an optical/coaxial digital input
connector) which does not contain the Dolby Digital (AC-3) decod¬
er, be sure to select "PCM". If "Bitstream" is selected, any attempt
to play DVDs may cause such a high level of noise that it may be
harmful to your ears and damage your speakers.
1
l
3
(select)
rara
VEg20'1
CD
CD
■STOP ►HSTIIL/PAUSE ►PLAY
(
_
) CDi
C_
)
-M SKIP w -mGGSBSEARCH**
C II ) cnr^>
TITLE
MENU
°/
\0
6
(select)
^►JJ
r~\
DISPLAY
RETURN
Subtitle
audio
angle
(ZZj
MARKER
1
2
3
Q
Q CD Q
PLAY MODE
4
5
6
Q Q Q O
m
Recommendable
setting
connected
LPCM
(DVD)
Dolby
Digital
No amplifier is connected
Off
Bitstream
AV amplifier (with digital audio input
connector) without Dolby Digital
decoder
PCM*1
PCM*2
AV amplifier including Dolby Digital
decoder
PCM*'
Bitstream
B
Type d'amplificateur a raccorder
Reglage
recommande
LPCM
(DVD)
Dolby
Digital
Aucun amplificateur raccordb
Non
Bitstream
Amplificateur AV {avec connecteur
d'entrde audio numbrique) sans
decodeur Dolby Digital
PCM*1
PCM*2
Amplificateur AV equipb d'un
decodeur Dolby Digital
PCM*1
Bitstream
B
Tipo de amplificador que va a
ser conectado
Ajuste
recomendado
LPCM
(DVD)
Dolby
Digital
No est& conectado un amplificador
No
Bitstream
Amplificador AV (con conectore de
entrada de audio digital) sin
descodificador Dolby Digital
PCM*1
PCM*2
Amplificador AV incluyendo
descodificador Dolby Digital
PCM*1
Bitstream
76
|
Also refer to "Common procedures of initial settings" on
!
page 64.
;__ ____
Publicidad
