WARNING!
– Ensure the 3-point passenger restraint system
fits as tightly across the user's body as possible
without discomfort and no part is twisted.
– Ensure the 3-point passenger restraint system is
not held away from the user's body by parts of
the wheelchair such as armrests or wheels etc.
– Ensure the user restraint has a clear path from
the user to the anchor point without interference
by any part of the vehicle, wheelchair, seating
or accessory.
– Ensure the lap belt fits snugly over the occupant's
pelvis and is not allowed to ride up into the
abdominal area.
– Ensure the user is able to reach the release
mechanism unaided.
1.
Attach the 3-point passenger restraint system refering to the
user manual supplied with your 3-point restraint system.
1583571-A
IMPORTANT!
– Apply the pelvic belt of the 3-point passenger
restraint system low across the pelvis so that the
angle of the pelvic belt is within the preferred
zone (A) of 30° to 75° to the horizontal. A steeper
angle is preferred, but never exceeding 75°.
A
Transport
33