Descargar Imprimir esta página

Bimar FE-45D Folleto De Instrucciones página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

 Do not use the device at room temperatures above 40 °C.
 Do not move the appliance when it is in function.
 Do not leave the device exposed to the weather (sun, rain,
etc.).
 Do not pull on the cord to disconnect the plug from the
socket.
 If the electric cord is damaged, it has to be replaced by the
supplier or an authorized service center or a professionally
qualified, to avoid any risks.
 Do not use the appliance with a timer or a programmer or
with a system that can switch on the appliance
automatically, to avoid risk of fire, since a fire risk exists if the
heater is covered or positioned incorrectly.
 In the event of a breakdown or poor operation, turn the fan
heater off and ask for professionally qualified help: repairs
made by unqualified persons can be dangerous and render
void the warranty.
INSTALLATION
 After removing the packing materials, check the integrity of the heater; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach
of children because they are potential sources of danger. Attention: any stickers
or advertising material applied to the grid removed before using the appliance.
The manufacturer declines all responsibility in case this is not safe working
practices will be respected.
 Before connecting the appliance, check that the voltage shown on the data plate
matches that of your electricity and that the electric plug is grounded. In the
event of incompatibility between the electric outlet and the plug of the
appliance, have the outlet replaced with another more suitable type by
professionally qualified personnel, who will make sure that the section of the
wires of the outlet is appropriate for the absorbed power of the appliance. In
general, the use of adapters or extension cords is not recommended; if their use
is indispensable, they must conform to existing safety standards and their
current capacity (amperes) must not be less that the maximum of the appliance.
10

Publicidad

loading

Este manual también es adecuado para:

Vs56