SHERCO BIKEN Manual Del Usuario página 49

ADJUSTING YOUR BIKE
Handlebar adjustment
The handlebar can be adjusted by rotating it, after loosening the stem bolts that hold it in place.
This adjustment allows you to obtain a straighter or, on the opposite, a more inclined position on the bike.
You can also raise or lower the handlebar by adding or removing spacers between the stem and the headset.
However, we strongly recommend that an authorized Sherco dealer carry out this operation.
CAUTION
Make sure to comply with the tightening torque given in the "settings and basic values" table
Gear shifters and brake levers are adjustable to suit the rider. They can be moved horizontally, from left to
right, and tilted vertically, by loosening the screw on the clamp.
As standard, Sherco bikes are configured with the rear brake on the righthand side of the handlebars and the
front brake on the lefthand side of the handlebars.
&p. 62).
(
49