Descargar Imprimir esta página

STAMOS SWG-EMP 30L180 Manual De Instrucciones página 12

Elevador magnético manual

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
2.3.
Personal safety
a)
Do not use the device when tired, ill or under the influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the device.
b)
The device is not designed to be handled by persons (including children) with limited mental and
sensory functions or persons lacking relevant experience and/or knowledge unless they are supervised
by a person responsible for their safety or they have received instruction on how to operate the
device.
c)
The device can be handled only by physically fit persons who are capable of handling it, properly
trained, familiar with this manual and trained within the scope of occupational health and safety.
d)
Use personal protective equipment as required for working with the device, specified in section 1
(Legend).
The use of correct and approved personal protective equipment reduces the risk of injury.
e)
Do not overestimate your abilities. When using the device, keep your balance and remain stable at all
times. This will ensure better control over the device in unexpected situations.
f)
The device is not a toy. Children must be supervised to ensure that they do not play with the device.
2.4.
Safe device use
a)
Do not use the device if the ON/OFF switch does not function properly (does not switch the device on
and off). Devices which cannot be switched on and off using the ON/OFF switch are hazardous, should
not be operated and must be repaired.
b)
Make sure the device is turned off before attempting any adjustments, accessory replacements,
cleaning and maintenance or before putting the device aside. Such precaution will reduce the risk of
accidentally activating the device.
c)
When not in use, store in a safe place, away from children and people not familiar with the device who
have not read the user manual. The device may pose a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by qualified persons, only using original spare
parts. This will ensure safe use.
g)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
h)
Do not work on two workpieces at the same time.
i)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
j)
Keep the device away from sources of fire and heat.
k)
Do not exceed the maximum lifting capacity.
l)
The device works most effectively with a workpiece, which is flat, free from dirt, contains small
amount of carbon and is made of steel plate thicker than 5 mm. Different properties of a workpiece
affect the magnetic force. It is not recommended to work with painted or coated workpieces.
Remember: the thicker metal plate, the stronger magnetic force.
m) Turn the device on only when it is in contact with a workpiece. Otherwise, a workpiece or different
objects, which are in the distance, may cause injuries when being pulled by magnetic force.
n)
Before turning the device off, prevent a workpiece from falling down and causing damages or injuries.
Make sure a workpiece is on the surface.
o)
The temperature of a workpiece to be lifted cannot exceed 80
working with workpieces, which have been just welded or processed. Wait until a workpiece cools
down. Do not use the device if the working temperature exceeds 80
affect the effectiveness of the device.
p)
Keep all magnetic and electronic devices away from the device.
q)
Do not interfere with the magnet inside the device.
r)
Never use the device to lift objects overhead or above other people.
s)
Always check magnetic force (lifting capacity) before starting operation.
t)
Do not shake the device when it is in use.
u)
The device cannot be used as an accessory of welding or electric machines.
v)
Keep the magnet clean and smooth. Use sandpaper if necessary, but be careful not to leave any burrs.
EN
o
C. It is especially important when
o
C. High temperatures negatively

Publicidad

loading

Productos relacionados para STAMOS SWG-EMP 30L180

Este manual también es adecuado para:

Swg-emp 30s180Swg-emp 50l300Swg-emp 50s300