Starting The Unit; Insertion Of Batteries - SPORT-ELEC BODY BEAUTIFUL Manual De Uso

PROGRAMS
PREPARATION
PROG 1
20 mins prior to sport to prepare and warm up your muscles.
The frequencies vary from 1 to 13 Hz to provide a genuine massage effect.
Duration : 20 min
PROG 2 SILHOUETTE SCULPT
40 mins of body building to firm up, but also to increase muscular volume after a period of inactivity. This programme is
ideal for keeping the body firm and for re-shaping your silhouette.
Frequencies vary from 30 to 60 Hz alternated with frequencies at 10 Hz and 3 Hz for active recovery to build up muscle
resistance.
Duration : 40 min
MUSCLE TONIC
PROG 3
20 mins of more strenuous weight lifting to work on target areas.
Frequencies vary from 70 to 100 Hz alternated with frequencies at 3 Hz for active recovery to build up tonicity and
muscular strength.
Duration : 20 min
MASSAGE RELAXANT
PROG 4
20 mins to relieve muscular fatigue and allow you to recover after physical effort.
The frequencies vary from 40 to 100 Hz to provide the state of wellbeing of a relaxing massage.
Duration : 20 min
RECOVERY
PROG 5
Thanks to fast frequencies changes this program allows the muscles to recover faster through relaxing effects.
Duration : 20 min
PROG 6 DEVELOPMENT
This program allows to improve the assets on the level of muscular form.
Duration : 40 min
FITNESS
PROG 7
Use this program to maintain the level of muscle endurance, resistance, and volume acquired.
Duration : 20 min
SU DOLORIS
PROG 8
This program relieves the muscular tensions effectively.
Duration : 20 min
I. INSERTION OF BATTERIES
• Check that the device is switched off.
• Open the batteries compartment, insert three 1,5 V AA LR6 batteries into the compartment then to close the case.
• Comply with + and - indications.
• Do not mix used and good batteries.
• Do not use rechargeable batteries.
• For an optimal use of your device, it is advised to use good quality alkaline batteries.
12
II. STARTING THE UNIT
A / PRESENTATION OF THE UNIT
Your electromusculation device is an hight-tech appliance, it meets the current requirements in the field of medical application.
The interface "man machine" was simplified to the maximum; it is realized from lightened pictograms, indicators and function key.
Among the eight pictograms the one enlightened in green displays you the program chosen by the "
Two scales indicator (1 per channel) displays you 30 levels of power.
You will find also 6 control keys (see diagram page 11) :
- 1 ON/OFF key (key red ) - press shortly
- 1 " " key to choose the programs - press shortly
- 2 double keys " "/" " to adjust the power of stimulation (press shortly).
A long press (1 second) on the key " " returns the chosen power rapidly to 0.
THERAPEUTIC APPLICATIONS
- Private: to strengthen and / or to maintain muscle strength.
- Physiotherapists: to ease muscular tensions.
- In hospital environment: to prevent muscular atrophy and to treat pain.
B / USING THE UNIT
STEP 1 - ON / OFF " "
• A short press on the " " key puts the device under or except power.
• Every time when the power is on, the device carries out an auto-test on 11 essential safety parameters.
During the auto-test all the indicators are lit during ½ second.
• If an internal defect in the device is detected, all the pictograms flash in green and the device stops.
Then, return the device to After Sales Service.
• The auto-test does not take into account the detection of the used batteries.
When batteries are used, the auto-test is not activated.
• A long press (of more than 3 seconds) involves the release of the auto-test.
In this case stop the device, please, by pressing the key " " and then make a short press on the key " ".
STEP 2 - PROGRAM SELECTION KEY " "
To select a program, make one or more short presses on the key "
The programs are announced by pictograms.
As soon as a program is selected, corresponding pictogram lights.
Once the program is chosen, you can start it by increasing the power on one of power keys " ".
During the program the key " " is inactive.
STEP 3 - END OF THE PROGRAM - STOP DURING THE PROGRAM
At the end of the session the device stops automatically.
To stop the device during the program, put the 2 power keys back on zero or press the key " ".
STEP 4 - ADJUSTMENT OF THE POWER
The power is divided into 10 levels: 5 green, 3 orange and 2 red levels.
To change the level press the key " ".
You have 64 levels to regulate the power from 0 to 64.
STEP 5 - BATTERIES
• If the batteries are "good", there is no blinking.
• If the batteries are "weak", two orange indicators blink. Your device still functions.
• If the batteries are "used", two red indicators blink. Your device stops, even in the course of a program. Change the batteries.
STEP 6 - DISCONNECTION
Your device is equipped with a detector of electrodes disconnection.
If the contact between the human body and a single electrode is absent, the power is stopped on the concerned channel
(channel A = orange / channel B = green).
You are warned of a disconnection by blinking of green indicator during 30 seconds, after 30 seconds the blinking stops.
If none of the electrodes is in contact with the body, the power cannot be emitted.
" key.
", the programs scroll.
13