flir E Serie Manual De Instrucciones página 13

2 EN-US English
9. Adjust the infrared camera focus by rotating the focus ring.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
10. Pull the trigger to save an image.
11. If automatic upload is enabled, new images will automatically be uploaded to
your FLIR Ignite account when the camera is connected to the internet. You
can also upload images manually. To access your FLIR Ignite account, go to
https://ignite.flir.com.
You can also move images from the camera using the USB cable or the
memory card.
12. Import the images into a FLIR Thermography software and create an inspec-
tion report.
2.9 View from the front
See Figure 1.1 View from the front, page 1.
1. Laser distance meter.
2. Infrared lens.
3. Focus ring.
4. Autofocus button.
5. Trigger.
6. Lamp for the digital camera (left and right sides).
7. Digital camera.
8. Attachment point for the hand strap bracket (left and right sides).
9. Tripod mount.
10. Attachment point for the hand strap, wrist strap, or lanyard strap (left and
right sides).
2.10 View from the rear
See Figure 1.2 View from the rear, page 2.
1. Cover for the USB connector and memory card slot.
2. Microphone.
3. Speaker.
4. Touch-screen LCD.
2. This item is dependent on the camera model.
#T810585; r. AC/80293/80293; mul
2
2
10