PNI CS101W Manual De Usuario página 3

Warnings
» To prevent the risk of electric shock,
disconnect the mains electricity before starting
the installation of the switch.
» Do not carry out maintenance operations on
the switch if it is connected to the mains.
» This switch must only be installed by a licensed
electrician.
» It is important to make all connections
according to the connection diagram below.
» At the end of the assembly, make sure that the
wires are not under tension and that the screws
are well tightened.
» Do not exceed the maximum recommended
load.
Technical specifications
» Rated voltage: 110V-240V AC
» Rated current: max. 3.6A
» Output power: 3-800W/switch
» Energy consumption: 0.02A
User manual - 3