Publicidad
Idiomas disponibles
Idiomas disponibles
1. INTRODUCTION
The MI2-700ETH is a two-channel analog-to-digital music converter for COMPACT systems. It allows the simultaneous broadcasting
of both music channels through the IP network in streaming.
Main characteristics:
•
Simultaneous conversion of two music channels via IP
network in streaming.
•
Two stereo analog music inputs via RCA connectors.
•
Configurable input sensitivity ((+6dB, +4dB, 0dB -10dB or -
20dB).
•
Dual Ethernet connection for installations with redundant
network systems. The connection is constantly monitored
and switches automatically if necessary.
•
IP address, gateway and netmask stored in flash memory.
•
Indicator lights for:
-
SIGNAL IN (presence of analog signal at the inputs).
-
STREAMING (indicating active output channel).
-
POWER: Power supply.
2. FRONT VIEW
(1) SIGNAL IN indicator of CHANNEL 1.
Blue LED indicator of analog signal presence at the input
of channel 1. It blinks following the input signal level.
(2) CHANNEL 1 STREAMING indicator.
Yellow LED indicator of active output channel. It lights up
when sending the audio of channel 1 in streaming.
(3) CHANNEL 2 SIGNAL IN indicator.
Blue LED indicating the presence of an analog signal at
the input of channel 2. It blinks following the input signal
level.
MI2-700ETH 5.2.002 version
MI2-700ETH
•
•
•
•
Figure 1
(4) CHANNEL 2 STREAMING indicator.
(5) GENERAL FAULT indicator light.
(6) STARTING/RUNNING indicator.
(7) POWER indicator.
(8) ON/OFF switch.
Converter of 2 analogue audio signals
to 2 channels of streaming via IP
-
STARTING/RUNNING, indicating the status of the
internal processor of the device (starting up or ready
and running).
-
GENERAL FAULT: System alarm indicator.
-
ETHERNET A and B connection status (LINK and
ACTIVITY).
USB connection for system monitoring.
Supervision of device operation through Call Point
software and/or basic TELNET or SSH (Secure Shell)
functions.
Full range power supply (100-240Vac 50/60 Hz).
Device of one unit of height and half width in 19" rack.
Yellow LED indicator of active output channel. Illuminates
when streaming channel 2 audio.
Yellow LED indicator of alarm in the system.
Green LED. Flashes during device startup. When lit
steadily, it indicates that the device has finished the start-
up process and is now operational.
Indicates that the device is powered.
R+D Department
4
Publicidad
