ENAR GEEL 2i Manual De Operación página 59

5.8 GENERATOR CONTROL PANEL
Ref
a
b
c
d
e
GEEL 2i CE
5.9 DC OVERCURRENT PROTECTOR
PORTABLE GENERATOR
Description
Oil warning light
Overload indicator light
AC pilot light
ESC (engine smart control)
3 in 1 switch knob
The DC overcurrent protector (a) will automatically shut off when the DC circuit is
overloaded or poor connection occurs. If the indicator inside the DC overcurrent protector
(a) button pops out, it shows that the DC overcurrent protector (a) has switched off. Wait
a few minutes and then push the button in to return to "ON" position .
Ref Description
f AC receptacles
g Ground terminal
h DC receptacle
i DC protector
GEEL 2i LA
en
GEEL 2i 21