Descargar Imprimir esta página

ENAR GEEL 2i Manual De Operación página 64

Publicidad

Idiomas disponibles

Idiomas disponibles

6
MAINTENANCE
6.1 MAINTAINING THE EMISSION CONTROL SYSTEM
6.2 ENGINE MAINTENANCE
Check the fuel level.
Check the engine oil level.
Inspect the fuel lines.
en
Inspect the air filter. Replace
as needed.
Clean the air cleaner
1
element.
Change the engine oil
Clean the engine cooling
1
fins.
Clean the sediment cup or
fuel strainer.
Check and clean the spark
plug.
Check and adjust the valve
clearance.
26
GEEL 2i
Normal maintenance, replacement, or repair of emission control devices and systems may
be performed by any repair establishment or individual; however, warranty repairs must be
performed by a dealer/service center authorized by ENAR. The use of service parts that are
not equivalent in performance and durability to authorized parts may impair the
effectiveness of the emission control system and may have a bearing on the outcome of a
warranty claim.
The chart below lists basic machine and engine maintenance. Refer to your engine
operator's manual for additional information on engine maintenance.
Refer to the engine owner's manual for additional information.
Daily
before
starting
Note:
The installation and major repair work shall be carried out only by specifically trained
person.
After first
Every 50hr
20hr or 1
or
month
3 months
Every 100hr
Every 300hr
or 6 months
or 1 year
PORTABLE GENERATOR

Publicidad

loading