Descargar Imprimir esta página

Saivod BV-9015-23 Manual Del Usuario página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT OPERATING TIPS
·For best circulation of food that are to be blended with some liquid, pour the liquid into the jar first, then add
solids.
·Some of the tasks that cannot be performed efficiently with a blender are: beating egg whites, whipping
cream, mashing potatoes, grinding meat, mixing dough, extracting juice from fruit and vegetable
·The following items should never be placed in the unit as they may cause damage: bones, large pieces of solid,
frozen food, or tough foods such as turnips.
·To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by one through
the lid opening.
3) Do not run the appliance for more than 3 minutes per time, and only wait until the unit is cooled to room
temperature before performing next operation cycles.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
1.
Before cleaning, unplug the blender.
2.
Always wash immediately after use for easier cleaning. Don't let food dry on the jar assembly as this will
make cleaning difficult.
3.
Pour a little warm soapy water into the jar and turn the knob to P position for a few seconds. And then
empty the jar.
4.
Rinse the measure cup, lid, seal ring 1, jar unit, seal ring 2 and blade assembly by hands or in a
dishwasher and then dry. They are dishwasher safe components, but the temperature setting shall not
exceed 65℃ .
5.
Brush the blade clean using warm soapy water, then rinse thoroughly under the tap. Don't touch the
sharp blades, handle carefully. Don't immerse the blade assembly in water. Leave to dry upside down
away from children.
6.
Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn spots by rubbing with
non-abrasive cleaner. If liquids spill into the motor unit; first unplug the unit, then wipe with a damp
cloth and dry thoroughly.
CAUSION
1)
Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2)
Do not use rough scouring pads or cleansers on parts or finish.
24

Publicidad

loading