Publicidad
Idiomas disponibles
Idiomas disponibles
1
3
Use the Mounting Plate as a guide drill 4 holes for Anchor and insert
the Anchor. Install the mounting plate onto Outlet Box with Box Screws
and Tapping Screws.
3
Connect the wire connector plugs correctly. The wire connector plugs
design with fool proof device, please don't force to plug. Otherwise it
may affect the normal use of the light fan or burn the fan motor.
4
(Green/Yellow)
Canopy
(Green/Yellow)
AC IN L(Black)
AC IN N(White)
Controller
(Receiver)
MOTOR U
MOTOR V
MOTOR W
LIGHT N
LIGHT L
FROM POWER SOURCE AC 110-120VOLT 60Hz 3.5AMPS.
Connect wires from controller to power supply with wire connectors.
1
2
Earth
Live
Neutral
Antenna
Fan
Plug
Light
Installation & Operating Instructions for the
Parrotuncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
2
Hook the fan to the supporting cable with keylink and lock the keylink.
5
3
1
Place Controller into the canopy and tidy up the wiring. Push the canopy
to the mounting plate, make two sliding holes aligned to the two pre
installed screws, and then turn clockwise until tight. Tighten the pre
installed screws. Fix the canopy with two other screws.
6
A569201CB
2
Place the screw of frame through the
hole of arm and secure with nuts.
4
Publicidad
