Descargar Imprimir esta página

Levoit LV600S Serie Manual Del Usuario página 13

Humidificador ultrasónico híbrido inteligente
Ocultar thumbs Ver también para LV600S Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

USING YOUR SMART HUMIDIFIER (CONT.)
Warm Mist
Press
to turn on warm mist. Keep
pressing to increase the heat setting for
the mist, and to turn warm mist off.
Caution: Mist may be hot. Do not place
your bare hands, face, or other exposed
skin over the nozzles while using warm
mist.
[Figure 3.2]
The humidifier may take 15 minutes to
warm up before producing warm mist.
The warm mist function can be used
during Sleep Mode.
Figure 3.2
Humidity Level
You can customise the humidity level that
the humidifier will maintain. The humidifier
will automatically stop misting when the
room reaches the target humidity level.
1. Press
repeatedly to set a humidity
level between 40% and 80% Relative
Humidity (RH).
2. The display will flash 3 times to confirm
your selection, then return to showing
the current humidity percentage in the
room.
Note:
The humidifier will automatically mist
for 15 seconds after being turned on,
even if the room has reached the set
humidity level.
Press
once to see the selected
humidity level again. Keep pressing
to change the humidity level.
You can still adjust the mist level, the
timer, and the warm mist setting after
setting the humidity level.
The humidifier will not increase the mist
level when a humidity level percentage
is set, only stop misting once the set
humidity level is reached. If you want
the humidity in your room to increase
faster, set the humidifier to high mist
level.
3. Once the humidity of the environment
reaches the humidity you set, the
humidifier will automatically stop misting.
4. The humidifier will continue detecting
the humidity level in the room. It will
start misting again when the humidity
drops to 5% below the set level.
Note:
To cancel the set humidity level, press
and hold
for 2 seconds, which
will set the humidity level to
display will flash 3 times to confirm, then
return to showing the current humidity
percentage in the room.
When the humidity level is set to
the humidifier will automatically keep
misting at the current mist level until it
runs out of water.
EN
"--"
. The
"--"
13

Publicidad

loading

Este manual también es adecuado para:

Luh-a602sLuh-a602s-weu