Aiwa CT-Z109 Manual De Instrucciones página 9

BAND TAPE
CD/MD IN
1
TAPEPLAYBACK
~ With the unit on, press MY INFO.
The "MY INFO indicator lights up and the
timer is activated.
To cancel the timer
Press MY INFO again so that the '{MY INFO
indicator disappears.
To check the setting
With the unit off, press MY INFO.
The turn-on time, followed by the radio frequency
and the turn-off time, appears in the display
window each for 1 second, then the unit turns off.
Notes
Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and
tunes in the preset radio program at the preset
time automatically.
Even if you are listening to a radio program with
this function, pressing the following buttons
switches the unit to other mode:
— Pressing BAND changes the unit to Radio
mode.
— Pressing TAPE changes the unit to Tape
Play mode.
— Pressing CD/MD IN changes the unit to CD/
MD IN mode.
If you switch modes with these buttons, the unit
does not turn off at the turn-off time of the timer.
2 1
~ Inserts cassette to start playback.
If a cassette is already inserted, press TAPE
to start playback.
Playback starts in the direction that the unit
played back previously.
z Adjust the volume with i-l-.
Press the following buttons to operate tape
transport.
To
do this
] Press this button
Eject the cassette*
El
" When you eject the cassette, the unit switches to
Radio mode.
When a cassette is inserted, @ comes out sathat it
can be pressed to eject the cassette.
' Do not press or ~ all the way, Doing so may
change the direction of tape transport.
ENGLISH
8