Blackstone 2142EU Manual Del Propietário página 14

OWNER'S MANUAL | TROUBLESHOOTING
CLEANING THE BURNER ASSEMBLY
To reduce chance of "flash-back" the procedure below should be
followed at least once a month when spiders are most active or
when your appliance has not been used for a period of time�
VIDEO TUTORIAL
How to Clean Your Burner Tube
youtube.com/watch?v=xKQTCrFCzf8
ensure that the gas is turned oFF at control knobs and gas detach the regulator assembly from the lPG cylinder by
STEP 01 STEP 01
supply� Remove the griddle top� turning the quick Coupling Nut clockwise�
• Remove griddle top�
Carefully detach and
STEP 02
• Remove the burner by pulling the burner clip� Use a screwdriver or
remove the burner�
needle nose pliers�
Carefully lift the burner up and away from the gas
STEP 02
valve orifice�
Clean the inside of
STEP 03
the burner:
a. Run a bottle brush (not a wire
brush) or a stiff wire bent into
a small hook through each
burner tube several times�
b. Use compressed air to blow
through the burner tube and
out the burner ports (Wear eye
protection)�
Brush entire
STEP 04
outer surface of burner to
remove grime�
Clean any blocked ports
STEP 05
with stiff wire such as an open
paper clip�
Carefully replace
STEP 06
burners and reattach, with
attention to the location of the
ignition needle�
14
Fuel nozzle Fuel nozzle
Burner opening Burner opening
The gas rail fuel nozzle
must be reengaged within the
burner opening�
CUSTOMER SUPPORT
For all questions, inquiries, or customer support, please contact:
Griddle Masters Europe ApS
Blackstone Europe
Tel. +45 2424 7709
Nordre Strandvej 119, 3150 Hellebæk
Denmark
www.blackstone-europe.com
Model: 2142eU
BLACKSTONEPRODUCTS.COM/SUPPORT SUPPORT BLACKSTONE EUROPE.COM