Edox 07 Manual Del Usuario página 9

The crown has 3 positions: I, II and III,
there is two pushers, A and B.
Zero setting for the counters:
Pull the crown in position II, press the
pusher A (to select the hand), the big sec-
ond hand makes one full turn. Press the
pusher B (short pressure: step by step,
long pressure: rapid continuous rotation).
Date setting: Pull the crown in position II,
correct the date, press the crown back in
position I.
Time and moonphase setting:
Turn the crown in position III, turn the
crown, adjust the time. To correct the
moon phase, press the pusher B (short
pressure: step by step, long pressure:
rapid continuous rotation). Press the
crown back in initial position.
Chronograph functions:
Press pusher A: start of timing
Press pusher A. stop of timing
Press pusher A: re-start of timing
Press pusher B: setting back the hands to
zero
Split timing functions:
Press pusher A: start of timing
Press pusher B: stop of timing, split timing
Press pusher B: re-start of timing
Press pusher A: stop of timing
Press pusher B: setting back the hands to
zero
Movements 10, 101, 102, 103,
104
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/10 of a second for up to
30 minutes.
Pusher B: reset (after a stop)
Accumulated timing chronograph:
Press button A to start. Press button B after
arrival of the first "sprinter" – The time will
be indicated. Press button A after arrival of
the second "sprinter" – The time is memo-
rized. Read the time of the first "sprinter".
Press button B to read the time of the sec-
ond "sprinter" (the chronograph hands will
turn at a faster speed until indication of the
time). Press button B to reset hands to zero.
NB: the hands should be reset to their origi-
nal position before the chronograph is used:
Hand adjusting:
Pull out the crown to position 3.
Press the button A and B at the same time
for at least 2 seconds.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the centre
stop second.
Press button B to adjust the next hand.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the hand of
the small sub counters.
Press button B to adjust the next hand.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the minute
hand.
Return to crown position 1.
Movement 105
Watch functions:
The crown has two positions. There are
two pushers A and B. There are three cor-
rectors C D and E.
Time setting:
Pull the crown in position II. Turn the
crown until the correct time is reached.
Push the crown back in position I.
Date setting (changes from 31 to 1):
Press the corrector C once to adjust the
date 1 day forward.
(Do not operating the date setting
between 21.00 and 01.00h).
Date, day of week and month setting:
Press the corrector C: the date hand
advances gradually.
Press the corrector D: the day of the week
advances gradually.
Press the corrector E: the month advances
gradually.
Chronograph (Start- Stop – Reset):
Start: press pusher A
Stop: press pusher A
Reset: press pusher B
9