Descargar Imprimir esta página

METRO PROFESSIONAL GCV1470 Manual De Instrucciones página 16

Mostrador refrigerado

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
Defrosting
The appliance defrosts itself automatically every
6 hours. The dot underneath the defrost symbol
lights up.
Notes:
The defrost process takes approx. 25 minutes.
GB
Keep the defrost button
6 seconds to cancel an active defrost process.
Automatic defrosting is deactivated when the
ambient temperature is above 20°C. The dot
underneath the defrost symbol
You can also start a manual defrost process by
keeping the defrost button
6 seconds.
Note: The next automatic defrost process starts 6
hours after the manual defrost process.
Storage
• Before storing, remove all foodstuffs from the
appliance, disconnect it from the supply and clean
the appliance and its accessories thoroughly.
• Store the appliance in a dry, protected
environment at room temperature and out of the
reach of children.
• Keep the appliance's doors open to avoid smell
or mold.
• To protect the appliance from dust, cover it
with a cloth that allows air circulation inside the
appliance.
4.
Troubleshooting
WARNING!
In case of failures or malfunctions, always unplug
the appliance immediately.
Only perform the steps described in this
instruction manual! All further inspection,
maintenance and repair work must be performed
by an authorized service center or a similarly
qualified specialist.
Should you require spare parts, always obtain
them from an authorized seller. Do not use
spare parts that are not recommended by the
manufacturer!
For access to professional repair, information for
ordering spare parts (including information on
the minimum period during which spare parts
are available) and instructions on how to find the
model information in the product database, please
go to www.metrocustomer.info.
For the minimum duration of the guarantee of this
appliance offered by the manufacturer, importer
or authorised representative, please refer to the
Warranty chapter.
pressed for approx.
flashes.
pressed for approx.
- 15 -
Problem
Possible cause
Power plug not
connected to
electrical outlet.
Appliance
does not
Supply cord is
operate.
damaged.
Other electrical
defect to the
appliance.
Thermostat
is not set
correctly.
Appliance is
located near
heat sources.
Appliance is
placed too near
to the wall or to
other objects.
Stored
foodstuffs or
other objects
Appliance
prevent proper
does not
closing of
achieve
doors.
required
temperature.
Appliance
overloaded,
filled with hot
foodstuffs or
filled in a way
that prevents
proper air
circulation.
Doors are
opened and
closed too
often.
Appliance is
placed too near
to the wall or to
other objects.
Appliance is
very noisy.
Appliance not
in a stable
position.
Solution
Connect power
plug tightly with a
suitable electrical
outlet.
Have supply cord
replaced by the
manufacturer, its
service agent or
similarly qualified
persons.
Have appliance
checked by a
specialist
Set temperature
with thermostat
as described in
this manual.
Move appliance
well away from
heat sources.
Keep a minimum
distance of 10cm
to walls or other
objects.
Reorder contents
or remove several
items to allow
doors to close.
Remove several
items, remove
hot foodstuffs or
reorder contents
of appliance
to allow air
circulation.
Take special
care that the air
outlet inside the
appliance is not
blocked.
Keep doors
closed for a while.
Keep a minimum
distance of 10cm
to walls or other
objects.
Place the
appliance on a
level and stable
surface.

Publicidad

loading