AYR Int LOCK BT Manual Del Usuario página 46

4.3. Synchronisation of BT controls
1- Insert the supplied button cell battery inside the remote control.
2- Keep the BT remote control and make sure that the door is clo-
sed and the lock is open.
If the BT remote control is synchronised as the first device,
it becomes the administrator and therefore the configuration
options are not available. It is very important that the first de-
vice to be synchronised is a smartphone.
3- Insert the pairing tool into the pairing hole until you feel a slight
"Click" and the LED lights up red and a beep sounds at the same
time.
46
EN