Publicidad
Idiomas disponibles
Idiomas disponibles
To attach the laser instrument to drywall or wood walls, hang the instrument from a nail
4.
or No.8 screw using the Keyhole Slot
To attach the laser instrument to steel surfaces, use the magnets on the rear side of the
5.
QuickSet
Rotating Mount.
®
.
11
16
Using Ceiling Bracket
To attach the laser instrument onto the angle iron or ceiling grid, first, attach the
1.
magnetic rear side of the QuickSet
the clamp of the Ceiling bracket to the horizontal section of the steel object.
2.
To adjust the height of the horizontal line, turn the Height-Adjustment Knob
to lower the instrument and counterclockwise to raise it.
It is recommended to clean the magnets of the QuickSet
TIP:
attaching it to any steel surface to ensure optimal hold to the mounting surface. Cleaning
reduces the interference of dust and debris between the magnetic surfaces.
Working with the Laser Target Plate
The Laser Target Plate
improves the visibility of the laser beam under unfavorable light
14
conditions and at long distances within the working range limits. Use the visible cross-line
markers on the front side of the target plate as a reference to determine the vertical and
horizontal line positions.
Magnets allow attaching the Target Plate
suspended objects. Kickstand allows positioning the Target Plate
Contact ToughBuilt
Customer Service for additional support.
®
Rotating Mount to the Ceiling Bracket. Then affix
®
Rotating Mount before
®
to steel surfaces, for hands-free leveling of the
14
on flat surfaces.
14
17
clockwise
13
Publicidad
