Descargar Imprimir esta página

Jata hogar HBAS1501 Instrucciones De Uso página 9

Analizador corporal

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• Switch on the scale and press "MODO". The display will show corresponding to one of the
13 memories of the scale between P01 and P13. Immediately and using buttons (5) look
for "P01" to enter data for a person and press "MODO" to set. It appears intermittently the
symbol that correspond with the male or female, select with the arrows (5) and push "MODO"
to fix it. Next insert the age, with the indication "AGE", with the same buttons (5) and press
"MODO " to fix it.
• Use the same button to select and press "MODO" to fix the height "cm" / "in" (inches),
depending on the weighing measures chosen before.
• The data of the selected number person is memorized. Wait for the digits "0.0" appear on
the screen.
• Repeat all the process with all the people that are going to use the scale.
GETTING WEIGHED AND OBTAINING THE PERCENTAGES OF BODY FAT, BODY WATER, BODY
MUSCLE, BODY BONE, DAILY RECOMMENDED CALORIES AND BODY MASS INDEX.
• Once all the data have been introduced in the memories, to get weighed and find out this
percentages, follow these steps.
• Press "MODO", select the user.
NOTE: The scale always keeps the last results, and then you need to change the memory if
your memory is different to the last weighing. Push "MODO" and the memory data will flash
on the display. Wait until "0.0 kg" is showed on the display.
• Get on the scale and remain still. First your weigh will appear flashing on the screen. Next
it will appear "0.. 0.. 0..0" and next the percentages in this sequence: body fat (FAT), basal
metabolic rate %, body muscle
IMC.
NOTE: When the body fat percentage is showed on the display at the same time it will appear
also the following indications: UNDERFAT, HEALTHY, OVERFAT, OBESE
These percentages and the weigh result will vary twice and next the scale switches off. The
adjoined tables will give an orientation of these percentages.
BEAR IN MIND THAT
• The tolerances are between 5 and 180 kg.
• If "Err" shows on the display it means the maximum weight of the scale has been exceeded.
• The display will show "Err" if you get off from the scale before showing the different percentages.
• You must proceed to change the batteries when the "Lo" symbol shows on the display. To do that,
open the lid placed at the bottom side of the scale and change them.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Dispose the batteries according to the local garbage regulations.
• Never throw away the appliance or the batteries to the rubbish. So you will help to the
improvement of the environment.
• The batteries must not be mixed with other domestic residues.
, body bone
, daily recommended calories (KCAL) and
9
Mod.HBAS1501
OF

Publicidad

loading