CAPITAL SPORTS Themis Manual Del Usuario página 29

EN
2
Unscrew 2 Phillips screws (18) pre-installed on the
back of the console (8). Connect the bottom of the
middle sensor wire (22) to the lower sensor wires
(23) of the main frame (1).
Insert the front support tube (6) into the main frame
(1). Secure with 2 washers (20) and 2 Allen screws
(19).
Connect the top of the centre sensor wire (22) to
the sensor wire (8-1) on the console (8). Attach the
console (8) to the console bracket and secure with 2
Phillips screws (18).
29