Descargar Imprimir esta página

Jata JVVS3015 Instrucciones De Uso página 8

Ventilador de suelo

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel to avoid a danger.
INSTRUCTIONS OF USE
• Remember the fan always must be placed on a flat and stable surface.
• Plug the appliance into the mains.
• To get the oscillation function push the oscillation knob
selected and the timer in a different position than "0".
• Select the desired working time by turning the timer till maximum 60 minutes, if you don't want timer
function set the knob in the
• Turn the speed selector (2) to:
- Position 0 - Off.
- Position 1 - Minimum speed.
- Position 2 - Medium speed.
- Position 3 - Maximum Speedy.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• Clean with a slightly damp cloth.
• It is important to keep the frontal grid and the back grid clean of dust.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces
of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
ATTENTION
• Avant de mettre en marche le ventilateur, veuillez lire
attentivement cette notice et conservez-la pour vous y
reporter au besoin.
• Cet appareil peut être utilisé par les enfants de plus de 8
ans et les personnes handicapées physiques, sensorielles
ou mentales réduites ou sans expérience ni connaissance,
si elles ont reçu l'instruction ou la surveillance pertinentes
concernant l'utilisation de l'appareil d'une façon sûre et
comprennent les dangers qu'il implique.
position. In position "0" the unit will be off.
FRANÇAIS
8
and remember, at least one speed must be

Publicidad

loading