Ashley Signature EF30-30A Guia Del Usuario página 5

PREPARATION
GROUNDING INSTRUCTIONS
This product must be grounded. This product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with all local codes and ordinances.
This fireplace is for use on 120 volts circuit and has a grounded plug that looks like the one illustrated
on Figure 1. See Figure 1 for grounding instruction. An adapter as shown at C is available for connecting
three-blade grounding type plugs to two-slot receptacles. The green grounding plug extending from the
adapter must be connected to a permanent ground such as a properly grounded outlet box. The
adapter should not be used if a three-slot grounded receptacle is available.
A
Grounding Pin
C
Grounding
Means
EF30-30A
MODEL#:
All manuals and user guides at all-guides.com
Figure 1
Adapter
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with qualified electrician or service person if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet; have a proper outlet installed by
qualified electrician.
Note:
A 15amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in
all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips
or a fuse blows on a regular basis when the fireplace is operating. Additional appliances
on the same circuit may exceed the current rating of the circuit breaker
B
Cover of Grounded
Outlet Box
Metal Screw
D
Grounding Pin
.
Page 5 of 13