Descargar Imprimir esta página

Blackstone 2287 Manual Del Propietário página 13

Plancha de 28" con campana
Ocultar thumbs Ver también para 2287:

Publicidad

Idiomas disponibles

Idiomas disponibles

Model: 2287
IGNITIoN INSTRUCTIoNS
1. CHECK VALVES
Turn knob to oFF position�
STEP 01
Push in knob and release� Knob should spring back�
STEP 02
If knobs do NoT
If knobs
do NoT spring back, replace valve assembly before using appliance.
spring back, replace valve assembly before using appliance.
Rotate knob to loW then turn back to oFF� Knob should
STEP 03
turn smoothly�
If burner does not ignite with open gas supply valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
Ensure gas is o at the supply shut o valve before checking
appliance valves.
3. ALWAYS CHECK BURNER FLAME BEFORE USE.
light burners and rotate knobs from HIGH to loW�
STEP 01
look below the cooking surface to view burners� When knob
STEP 02
is at HIGH, flames should be larger than when knob is at loW�
HEALTHY FLAME PATTERN
❶ ❶
❷ ❷
❸ ❸
❶ ❶
Flickers of yellow color.
Flickers of yellow color.
❷ ❷
dark blue color.
dark blue color.
❸ ❸
Vibrant blue.
Vibrant blue.
BLACKSTONEPRODUCTS.COM/SUPPORT
3. ALWAYS CHECK BURNER FLAME BEFORE USE.
WARNING
YELLOW OR IRREGULAR
If there is a sudden drop or low
If there is a sudden drop or low
flame issue, please reference the
flame issue, please reference the
Troubleshooting chapter.
Troubleshooting chapter.
USING YOUR BLACKSTONE
2. BATTERY POWERED IGNITION
do NoT lean over the appliance while lighting�
Insert one (1) AA
STEP 01
battery (not included) under the
ignitor button�
Screw the button into place over
the positive terminal�
STEP 02
❶ ❶ Turn the control knob to oFF�
Turn gas oN by turning the gas
cylinder handwheel counter-
clockwise 1 to 3 turns�
STEP 03
❷ ❷ Push and hold the ignitor button�
❸ ❸ Push and turn the control knob counter-clockwise to HIGH�
(Release the ignitor button when the burner lights�)
❹ ❹ Adjust the temperature to desired level�
❶ ❶
❸ ❸
❹ ❹
IF IGNITION DOES NOT OCCUR IN 5 SECONDS:
Turn the burner control knob oFF�
STEP 01
Wait 5 minutes�
STEP 02
Repeat the lighting procedure�
STEP 03
If burner does not ignite, please reference the Troubleshooting chapter.
If burner does not ignite, please reference the Troubleshooting chapter.
IF IGNITION DOES NOT OCCUR IN 5 SECONDS:
| OWNER'S MANUAL
1 to 3 turns
1 to 3 turns
❷ ❷
13

Publicidad

loading