Dolmar TM-102.16 Manual De Instrucciones página 120

22
EN
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without engaging
the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the blades are
engaged
– the parking brake is engaged without disengaging the blades
The table below shows various operating conditions, highlighting why the safety
device shuts down the engine.
O G .-
PERATOR R CATCHER
A) PILOT LAMPS ON (Key in «ON» position)
Sitting YES
Sitting NO
B) WHEN STARTING (Key in «START» position)
Sitting Uninfluential
Sitting Uninfluential
Absent Uninfluential
C) WHEN CUTTING (Key in «ON» position)
Absent YES
Absent Uninfluential
Absent YES
Sitting NO
Sitting YES
5.3 DIRECTIONS BEFORE STARTING THE WORK
Before starting to work it is necessary to carry out several of checks and operations to
ensure that the work gives the best results and is done in maximum safety.
5.3.1 S
EAT ADJUSTMENT
The sliding seat can be adjusted into six posi-
tions.
The position is changed by pulling up the
handle (1) and sliding the seat along to the
notch of the position wanted.
B T
LADES RANSMISSION
Disengaged «N»
Disengaged «N»
Disengaged 1...5 - F / R
Engaged «N»
Disengaged «N»
Engaged Uninfluential
Disengaged 1...5 - F / R
Disengaged «N»
Engaged Uninfluential
Engaged Uninfluential
HOW TO USE THE MACHINE
B E
RAKE NGINE
Engaged Stopped
Disengaged Stopped
Engaged Does NOT start
Engaged Does NOT start
Disengaged Does NOT start
Engaged Stops
Disengaged Stops
Disengaged Stops
Disengaged Stops
Engaged Stops
1