Step-by-step installation guide
Step-by-step installation guide
E. Installing the charcoal filters and Grease Filters
E1. Charcoal Filter assembly method
18 English
4.
Attach the microwave oven to the
top cabinet.
5.
Insert the 2 self-aligning screws
through the cabinet bottom shelf and
filler block into the outer top cabinet
of the unit. Continue to support the
unit until both screws are inserted
and engaged at least two full turns,
then fully tighten all screws until the
unit is secure.
1.
Insert the Charcoal Filter from the
back.
2.
Raise the front of the Charcoal Filter
until it is flat with the bottom, and
then pull it forward to lock it in
place.
E2. Grease Filter assembly method
F. Connect the ductwork for outside top exhaust
House Duct
House Duct
1.
Push the Grease Filter backward and
insert the Grease Filter until flatness
with bottom surface of products.
Extend the House Duct down to
1.
connect to the Exhaust Adaptor.
2.
Seal the exhaust duct joints using
duct tape.