Publicidad
Fig. 7
7.
Attach the Back (Ic) with #6 x 5/8" Philtruss Screws (T) through the predrilled holes. See Figure 7.
Fig. 8
8.
Insert the upper drawer half way into the unit and insert two Dowels (D) into the holes near
the front edge of the top. These dowels act as drawer stops and SHOULD NOT BE GLUED.
At some time you might want to remove the drawer. See Figure 8.
Page 6 — 900Wb — 06/10
Ic
D
T
T
D
x 10
x 2
Publicidad
