Bianchi E-OMNIA FX Manual Del Usuario página 7

1B
DANGER!
The use of a thru-axle other than the one provided may result in the incorrect assembly of the wheel and may compromise the
integrity of the frame.
WARNING!
Always use the thru-axles provided with the model.
DANGER!
Incorrectly mounted wheels may result in falls and serious accidents. If in doubt, contact your specialist retailer.
DANGER!
Never exceed the maximum torque value indicated on the axles. Incorrect tightening may damage the frame and fork.
"QUICK RELEASE" FASTENING SYSTEM
WARNING!
Use caution and observe the following warnings. Failure to comply with the warnings and provisions contained in this data sheet
exempts the manufacturer from any liability.
2C
WARNING!
Observe and use the thru-axles supplied with the product.
DANGER!
Incorrectly mounted wheels may result in falls and serious accidents. If in doubt, contact your specialist retailer.
Unlike quick-release systems, the thru-axles provided with this model are
screwed directly onto the frame dropouts using an M12 screw.
The length of the thru-axles is specific to this model and must be observed
in order to be able to assemble the wheels safely. (image 1B)
The quick-release is screwed onto the dropouts of the frame with a nut
(the nut on the other side of the hub adjusts the preload of the Quick
release, turn the nut anti-clockwise/clockwise to adjust the force to be
applied to the lever for locking).
The length of the quick release is specific to this model and must be
observed in order to be able to assemble the wheels safely. (image 2C)
DANGER!
The use of a thru-axle other than the one provided may result in the incorrect
assembly of the wheel and may compromise the integrity of the frame.
7